Measure the room before you assemble
The Back To Nature Penthouse Cat Tree by Lords & Labradors is a tall, branch-led structure, so the first step in a successful setup is deciding where it will live. Its overall dimensions are 70cm long x 70cm wide x 153cm high, and it stands on a circular base. Check both the complete footprint and the full height against your intended position before ordering or building.
Because the Penthouse is taller and requires more floor space than the Luxe and Trio models, it will remain a prominent feature in the room. Its natural wood supports, wicker details and neutral plush surfaces are meant to stay visible rather than be hidden under a fabric cover, so treat the tree as part of the room's layout rather than an afterthought.
Placement checkpoints for a tall cat tree
- Clear the full footprint: Mark out 70cm x 70cm on the floor. The circular base needs that space, and you should also leave room around it so the tree does not feel wedged into a corner.
- Check the ceiling and wall clearance: The tree is 153cm high. Confirm that the highest plush-covered bed will not touch a shelf, curtain rail or low ceiling, and that your cat has room to jump down safely.
- Keep the lower hideaway accessible: The covered wicker hideaway sits in the lower part of the structure. Make sure the entrance is not blocked by furniture or a wall so your cat can use it as a sheltered retreat.
- Think about traffic and noise: A tall tree in a busy walkway may be knocked or avoided. Choose a spot where people and other pets pass by without constantly brushing the base.
Stability starts with the base and the load limit
The Penthouse is supported by a circular base, and its maximum load is 20kg across the complete structure. That figure applies to the whole tree, not to each individual resting area. A cat may fall within the overall weight limit while still needing more usable resting space than a single platform or bed provides.
If you have more than one cat, the separate areas may allow compatible cats to occupy different levels at the same time, provided their combined weight remains within the maximum load and each cat has sufficient physical room and suitable access. Four available levels do not guarantee that cats will share the structure comfortably, so watch how they use it once it is in place.
Penthouse dimensions that affect setup
- Back To Nature Penthouse Cat Tree by Lords & Labradors: Overall dimensions: 70cm long x 70cm wide x 153cm high. These are the minimum floor and height figures to check before you choose a spot.

Back To Nature Penthouse Cat Tree by Lords & Labradors - Back To Nature Penthouse Cat Tree by Lords & Labradors: Covered wicker hideaway: approximately 40cm wide x 30cm high. The hideaway is a distinct lower space, so its entrance needs to stay clear.
- Back To Nature Penthouse Cat Tree by Lords & Labradors: Flat open platform: approximately 35cm wide. This intermediate resting spot is narrower than the beds, which matters if your cat is long or broad.
- Back To Nature Penthouse Cat Tree by Lords & Labradors: High-sided wicker bed and highest plush-covered bed: approximately 40cm wide x 8cm high each. These are the two main raised beds; check that each cat can turn around and settle in them.
- Back To Nature Penthouse Cat Tree by Lords & Labradors: Support diameter: approximately 7cm to 8cm. The natural wood supports are substantial, so allow visual and physical space around them.
- Back To Nature Penthouse Cat Tree by Lords & Labradors: Maximum load: 20kg across the complete structure. Use this as a whole-tree limit when planning for one or more cats.
Match the layout to your cat, not just the room
The Penthouse distributes four raised levels through a tall, staggered arrangement. A cat will need to move comfortably between raised areas positioned at different heights. Suitability depends on individual mobility, confidence and the distances your cat is accustomed to crossing rather than age alone.
This may not be the right layout if your cat needs broad steps, very low access points, substantially wider sleeping surfaces or a smaller floor footprint. The flat platform, high-sided wicker bed and highest plush-covered bed each need to be assessed separately for physical fit, because the maximum load does not confirm whether every individual resting area will provide enough usable room for a physically large or long cat.
Scratching sections and realistic expectations
The tree includes sisal-wrapped scratching sections, which give your cat a designated place to scratch. No scratching product can guarantee that your cat will stop using furniture or other household surfaces, so place the tree near areas your cat already scratches and keep those alternatives covered or redirected while your cat learns the new routine.
The natural wood, wicker details and neutral plush surfaces remain visible throughout the structure rather than being concealed beneath a complete fabric covering. That look is part of the appeal, but it also means the tree will be a noticeable piece of furniture, so choose its position with that in mind.
What the supplied information does not cover
The supplied product evidence does not include step-by-step assembly instructions, fixing hardware details or cleaning procedures. Do not guess at wall anchors, bracket positions or cleaning products. If those details are not in the packaging or the product listing, contact the retailer before drilling or attaching anything to a wall.
- Wall fixing: No wall-anchoring method is confirmed in the supplied information. If you need to secure the tree, check the manufacturer's instructions rather than improvising.
- Cleaning: No specific cleaning requirements are supplied. Use conservative, gentle methods for wicker, plush and wood until you have manufacturer guidance.
- Assembly order: The supplied record describes the finished structure but not the build sequence. Follow the included instructions rather than working from the product description.


