Measure the room before you build
The Back To Nature High Rise Cat Tree reaches 125cm high from a rectangular base measuring 55cm long by 45cm wide. Those are the two numbers to check against your intended spot before assembly, not after. The base needs a clear patch of floor, and the full height needs clearance above it so the top perch does not sit under a shelf, curtain rail or low ceiling.
The rectangular base requires less floor space than the broader Penthouse footprint, but that does not make the High Rise universally compact. Assess the exact 55cm by 45cm base against your available room rather than assuming it will tuck into any corner. Because the tree remains a visible feature at 125cm tall, plan for it to be seen, not hidden.
A placement check you can do in five minutes
Work through these checks in order. Each one uses a supplied specification, so you can confirm the spot before the box is open.
- Clear the full footprint: Mark out 55cm by 45cm on the floor. The base must sit flat with nothing pressing against it, and you should still be able to walk past without brushing the lower levels.
- Check the height above the base: The tree reaches 125cm. Look for at least that much clear vertical space above the marked footprint, including any overhanging furniture or fittings.
- Plan the approach route: Your cat needs to move comfortably between areas positioned at different heights. Leave room around the base for a confident jump or climb onto the lowest surface, and do not block the cave entrance.
- Confirm the load limit fits your household: The maximum load is 20kg across the complete structure. If more than one cat uses it, their combined weight must stay within that figure, and each cat still needs sufficient physical room and suitable access.
Dimensions that decide the spot
- Back To Nature High Rise Cat Tree by Lords & Labradors: Overall dimensions: 55cm long x 45cm wide x 125cm high. These are the floor and height figures to measure against your room before ordering or assembling.

Back To Nature High Rise Cat Tree by Lords & Labradors - Back To Nature High Rise Cat Tree by Lords & Labradors: Maximum load: 20kg across the complete structure. The limit applies to the whole tree, not to each resting area individually, so plan for the total weight of every cat using it.
- Back To Nature High Rise Cat Tree by Lords & Labradors: Open resting surfaces are approximately 30cm wide, with natural wood supports of approximately 7cm to 8cm diameter. These sizes tell you how much usable space each cat gets and how much structure the tree puts in the room.
Stability starts with the base and the load
A rectangular base gives the High Rise a defined footprint, and that base should sit on level, solid flooring rather than deep carpet or a loose rug that can shift. Keep the base fully supported across its 55cm by 45cm area. The supplied information does not include a wall-anchoring kit or fixing instructions, so do not assume the tree is designed to be screwed to a wall. If you want extra security, check the fittings supplied in the box and use a fixing method suited to your wall type.
The 20kg maximum load is a limit for the complete structure. It does not confirm physical fit within the individual resting areas, and a cat can fall within the overall weight limit while still needing more usable room than a single 30cm-wide surface or the covered cave provides. If your cat is physically large or long, measure the actual resting surfaces against your cat's length before relying on the weight figure alone.
Which cat the High Rise layout suits
The staggered design asks your cat to move between surfaces at different heights. Use this comparison to judge whether your cat will use it comfortably.
- Confident climbers: The two separate upper perches and the cushioned surface above the cave give three open positions at different levels. A cat that already moves confidently between staggered surfaces is the most likely fit.
- Cats that want a covered option: The cave beneath the lower resting surface offers a more enclosed alternative to the open perches, with an open front entrance and surrounding walls for greater coverage.
- Cats needing broad steps or low access: This may not be the right arrangement if your cat needs broad steps, very low access points or substantially wider sleeping surfaces. Suitability depends on individual mobility, confidence and the distances your cat is accustomed to crossing, not age alone.
- Multi-cat households: Compatible cats may use separate areas simultaneously, provided their combined weight stays within 20kg and each cat has sufficient physical room and suitable access. The number of available areas does not guarantee cats will share the structure comfortably.
Scratching sections and realistic expectations
The sisal-wrapped scratching sections are part of the tree's structure, not a guarantee. No scratching product can guarantee that your cat will stop using furniture or other household surfaces. Place the tree where your cat already scratches or rests, and keep the wrapped sections clear of clutter so they are easy to reach.
The natural wood supports and neutral plush coverings keep the open branch-led appearance visible rather than covering the structure completely in fabric. That design choice makes the tree a feature in the room, so choose a position where you are happy to see it at full height.
Product facts behind this guide
- Back To Nature High Rise Cat Tree by Lords & Labradors: The Back To Nature High Rise Cat Tree by Lords & Labradors combines three open resting surfaces with a covered cave, natural wood supports and sisal-wrapped scratching sections. The mix of open and covered areas is what determines where your cat is likely to settle and how much access space the tree needs.
- Back To Nature High Rise Cat Tree by Lords & Labradors: Two separate upper perches provide raised open positions, while a third cushioned surface sits directly above the cave. The third surface has a natural wood support passing through it, so it does not offer the same uninterrupted surface as the two separate upper perches.


